How to Watch IPL Online Live Streaming in India : Hotstar App

How to Watch IPL Online Live Streaming in India : Hotstar App

Well IPL (Indian Premier League) is a popular Twenty20 Cricket Tournament founded in 2008 hosted by BCCI which has now just become an annual Indian festival that usually starts from April and lasts till the end of May. As per the resources and online information IPL is recognized as one of the most-watched Twenty20 league worldwide and is also popular for its commercial success. IPL was the first sporting event that was broadcasted live on Youtube Channel in 2010. As of now IPL is conducting its eigth season that has been already started from 8th April 2015 onwards and is now receiving an amazing response from the people on the stadium as well as from the audience that is watching pepsi IPL live on their TV screens across the World. Check more on how to watch IPL online live streaming.

Currently in this eigth season of IPL 2015 there are total 8 teams (Rajasthan Royals, Kolkata Knight Riders, Mumbai Indians, Chennai Super Kings, Kings Eleven Punjab, Royal Challengers Bangalore and Surnrisers Hyderabad) fighting and practicing hard to win the IPL trophy and the prize money.

Watching Pepsi IPL is really a great source of enterntainment and pleasure to get rid from the all day long frustraing and tiresome work. So if you are at home in front of your Television screen then you can consider yourself very lucky getting a chance to watch live ipl streaming in front of your TV screens but what if you are not at your home working late hours in offices or your cable is not working and still wanting to watch live IPL streaming. I have seen lots of my friends searching and wasting hours for getting links for watching IPL online streaming but the truth is no such links exists and therefore here I am going to share how you can watch live IPL streaming online no matter where you are are as far as you are having a decent internet connectivity and a smartphone with you. Well the method that I am going to share is really new that works beautifully and is an official one too. Follow the below given steps on how to watch UPL Online live streaming.

Set Max Live Watch Online Free : Watch IPL Online Live Streaming

As I said above all the links that are provided over internet at different websites are fake and therefore I highly recommended all of you to first stop searching for such links as this is gonna waste your valuable time because no such links exists and the one and only way to watch live IPL streaming is to follow the below given method via Hotstar App. What here we gonna do is watch IPL live on set max through the Hotstart App that allows for free set max watch online feature. So before we proceed on further lets get familiar with Hotstar App. Watch IPL Online Live streaming with the help of Hotstar Live App.

About Hotstar App : Brief Intro and Key Features

Hoststar is basically an mobile application developed and produced by Star India Pvt Ltd providing free access to watch latest TV Shows, Movies, LIVE sports and much more on your smartphone. With Hostart App installed on your mobile device along with a good internet connectivity gives you the feel of carrying your own Television with yourself 24/7. What is more interesting about Hotstar is that you don’t need to sign-up or do any kind of registration for watching shows on Hotstar App. Currently Hostart App is available on all the major mobile platforms like Google Android, Apple iOS and Windows Phone.

How to Watch IPL Online Live Streaming via Hostar App : Steps to Follow

• First of all you need to download and install Hotstar App on your mobile device as per your mobile operating system platform.

Download Hotstar App for Google Android Smartphone

Download Hotstar App for Apple iOS Smartphone

• That’s it after downloading and installing Hotstar on your device you just have to open Hotstar on your device and navigate to the sports section and there you will find the IPL section from where you can easily watch live IPL streaming.

The post How to Watch IPL Online Live Streaming in India : Hotstar App appeared first on RushInformation.

Read More

How to Adjust Android Phone Volume Without Buttons

How to Adjust Android Phone Volume Without Buttons

There’s a popular saying that nothing is permanent and that goes quite well especially with the hardware devices which starts wearing out as their life cycle progresses. There’s nothing to surprise about this because no matter how hard or how safely you try to use these hardware devices they will surely gonna fail sooner or later but they will for sure. This same fact applies for all your mobile devices as well be it your android smartphone or Apple iPhone iOS though it is a well known fact that if you spend more you will get a better quality product but as i said above nothing is permanent so there’s no guarante that your device is going to last for long. In my personal life experience I have seen lot’s of mobile devices getting failed and my recent experience was with my friends android device whose volume buttons got damaged and was having quite a frustrating time adjusting the phone volume until I provided him with one amazing solution to adjust android phone volume without buttons which I am going to share with you and I hope you found this information helpful. Just check below on how to adjust android phone volume without buttons quickly.

How to Adjust Android Phone Volume without buttons : Volume ChopCUT App

By default there’s an option to adjust phone volume via android phone settings but accessing that becomes quite a hectic especially while listening to music or watching videos on phone. Though if you are having an android smartphone running on Cynaogen mod like Micromax Yureka there’s a special volume tile section under quick settings to adjust volumes frequently at ease but there’s no such direct option for normal android users. Therefore here I am going to tell you about an amazing app that is Volume ChopCUT which provides you easy control over all your phone volume settings.

• Download and Install Volume ChopCUT on your Android device

• After you will be finished with downloading and installing Volume ChopCUT app on your device it will provide you with three different volume input methods after you run the app. The three different volume input methods are – Basic Notification, Extended Notification and Floating Widget.

• Basic Notification options puts a direct link to the phone volume control settings on your phone notification bar for quick access. You can also choose different options from the type of volume to edit on the notification like ringer, alarm, media or all.

• Extended Notification places full volume controller on your notification bar so that you can easily increase, decrease or mute your phone volume.

• Floating Widget places a floating bubble on your phone screen no matter whatever you are accessing providing quick access to adjust your phone volume.

The post How to Adjust Android Phone Volume Without Buttons appeared first on RushInformation.

Read More

Vessyl – A smart and Intelligent cup for calorie dectection

Vessyl – A smart and Intelligent cup for calorie dectection

more info...

Read More

How to delete twitter account – Permanent deactivation

How to delete twitter account – Permanent deactivation

more info...

Read More

Godaddy Renewal Coupon 2015 – Promo includes domain

Godaddy Renewal Coupon 2015 – Promo includes domain

more info...

Read More

Be My Eyes App – helps the blind to see, through volunteers

Be My Eyes App – helps the blind to see, through volunteers

more info...

Read More

How to Change Default Picture Viewer in Windows

How to Change Default Picture Viewer in Windows

By default, when I double-click on a picture in Windows, Windows Photo Viewer opens the image! That’s nice, but I would rather it open with a different photo viewing program, such as Photoshop, GIMP, etc.

If this problem annoys you also, there is a simple way to change the default photo viewing program in Windows to the application of your choice! Actually, there are two ways to go about it.

Also, you can configure it so that one image type opens with one application and another image type opens with a different program. So you could have JPG images open with Photoshop and GIF images open with Photo Viewer, for example.

Adjust Default Programs

In Windows 7 and higher, you can change which file types a program opens or you can change which program is used when opening a specific file type. Click on the Control Panel and then click on Default Programs while under the icons view.

Here you will see the two options I mentioned above: Set your default programs and Associate a file type or protocol with a program.

If you click on the first link, you’ll get a list of the different programs installed on your computer. Select the program and Windows will tell you how many defaults this programs is set to open.

You can then click on Set this program as default to have it open all the default file types or you can click Choose defaults for this program to choose specific file types.

In the example above, Internet Explorer is set to open GIF images and Microsoft Office 2010 is set to open JPG files. All other formats are set to open with Windows Photo Viewer. If you want to use a different program to open pictures, for example, select that program from the list and then choose Set this program as default.

Adjust via Open With

Going back and clicking on Adjust a file type or protocol with a program will allow you to browse through the hundreds of file types stored on the computer and then change the default program for opening that type of file.

When you click Change Program, you’ll get a list of Recommended Programs and Other Programs, along with an option to Browse to a program that is not currently listed.

The advantage to this method as opposed to the first option is that here you can choose any program you like to open a file. In the first method, only programs that have registered with Windows will show up in that list and there is no way to manually add a missing program.

You can also get to this same dialog by right-clicking on the any file in Explorer, clicking on Open With and then clicking on Choose default program.

Windows 8, 10 Default Programs

In Windows 8 and Windows 10, things are slightly different because now you have desktop apps and you have Windows Store apps. By default, all Windows 8/10 PCs will have Windows Photo Viewer and the Photos app installed. The former is a desktop app and will load there and the latter is a Windows Store app and will load as an app.

You can follow the same procedures as for Windows 7, but the only difference is that you will see the Windows Store apps listed as options too.

Hopefully, you can now double-click on an image and expect the correct program to open. You do want to be careful changing these settings because there is no way to simply reset all default programs back to their original values. I’m not sure why this option doesn’t exist, because it should, but it’s just not there.

The only real way to reset default programs is to either download a registry file that will manually change each value or create a new user profile. These settings are stored on a per user basis, so creating a new user account will start you from scratch. If you have any questions, feel free to post a comment. Enjoy!

The post How to Change Default Picture Viewer in Windows appeared first on Online Tech Tips.

Read More

Change or Spoof a MAC Address in Windows or OS X

Change or Spoof a MAC Address in Windows or OS X

Every NIC (Network Interface Card) has a unique MAC address (Media Access Control). This applies to all types of network cards, including Ethernet cards and WiFi cards. The MAC Address is a six-byte number or 12-digit hexadecimal number that is used to uniquely identify a host on a network.

An example of a MAC address is 1F-2E-3D-4C-5B-6A and it falls into the Layer 2 networking protocol of the OSI model. In today’s networks, ARP, or Address Resolution Protocol converts a MAC address to a Layer 3 protocol address, such as an IP address. A MAC address can also be called a Physical Address. Read my post on how to find your MAC address if you don’t know it.

All MAC addresses are hard-coded into a network card and can never be changed. However, you can change or spoof the MAC address in the operating system itself using a few simple tricks.

So why would you want to change your MAC address? Well there are many reasons for this, mostly related to bypassing some kind of MAC address filter set on a modem, router or firewall. Changing the MAC Address can help you bypass certain network restrictions by emulating an unrestricted MAC Address or by spoofing a MAC address that is already authorized.

For example, a WiFi network may allow only authorized computers to connect to the network and filters out computers based on the MAC address. If you can sniff out a legitimate MAC address, you can then spoof your MAC address and gain access to the WiFi network.

Another example is if you have an ISP that allows only a certain number of computers to connect to the Internet from your home. If you have more computers that need to connect, you can spoof the MAC address of an authorized computer and connect from a different computer.

Change Windows MAC Address

You can change the MAC address for the network card in Windows pretty easily following the steps below.

Step 1: Click on Start, then Control Panel, then Network Connections, and right-click on the network connection you want to change the MAC address for and select Properties. It will normally either be Local Area Connection or Wireless Network Connection.

If you are using Windows Vista, Windows 7 or higher, you have to go to Control Panel, then Network and Internet, then Network and Sharing Center, and then click on Manage Network Connections or Change adapter settings.

Then you can right-click on the adapter and choose Properties.

Step 2: On the General or Networking tab, click the Configure button.

Step 3: Now click on the Advanced tab and click on the Locally Administered Address property or the Network Address property.

By default, the Not Present value is selected. Go ahead and click on the Value radio button and enter in a new MAC address. The MAC address is a combination of 6 pairs of numbers and characters, i.e. 40-A2-D9-82-9F-F2. You should enter the MAC address without the dashes.

You can go to the command prompt and type in IPCONFIG /ALL to check that the MAC address has been changed. Go ahead and restart the computer in order for the changes to take effect.

This is the simplest way to change your MAC address in Windows. You can also do so via the registry, but it’s much more technical and probably not required by most people.

Change OS X MAC Address

Changing the MAC address on OS X is definitely not as easy as it is on Windows. Firstly, you have to use Terminal (similar to command prompt in Windows) to actually change the MAC address.

Secondly, you need to manually figure out the technical name of the adapter before you can change the settings. I’ll explain everything below step by step, but it gets a bit complicated at times.

To start, let’s find out the current MAC address for your Mac. You can do this in one of two ways: via System Preferences or via Terminal. Open System Preferences, click on Network and then click on the Advanced button. Make sure to select the appropriate interface first (WiFi, Ethernet, etc) in the listbox on the left.

Click on the Hardware tab and you will see the first line is MAC Address. I thought you could simply choose Manually from the Configure dropdown, but that doesn’t allow you to edit the MAC address.

In Terminal, you can get the MAC address by typing in the following command:

ifconfig en0 | grep ether

This will give you the MAC address for the en0 interface. Depending on how many interfaces you have on your computer, you might need to run this command several times adding 1 to the number each time. For example, I ran the following commands below until I reached an interface that didn’t exist.

Now you can simply compare the MAC addresses listed here with the one you saw via System Preferences. In my case, my WiFi MAC address of f8:1e:df:d8:9d:8a matches with en1, so that is the interface I have to use for the next commands.

Before we change the MAC address, you can use a useful command in Terminal to generate a random MAC address if you need one.

openssl rand -hex 6 | sed ‘s/\(..\)/\1:/g; s/.$//’

Now that you have a new MAC address, you can change the current one using the following command below. Replace XX with the actual MAC address you want to use.

sudo ifconfig en0 ether xx:xx:xx:xx:xx:xx

In order to do this, you need to be logged in as an Administrator or you have to enable the root account in OS X. By default, root is disabled and it’s better to leave it disabled if you can. Just login as an admin and you should be able to run the command just fine. It will ask you for your password, though, before changing the MAC address.

Also, the address won’t change if you are still connected to a WiFi network. You need to first disconnect from any networks and then run the command. Surprisingly, disconnecting from a wireless network in OS X is not intuitive at all. You have to press and hold the Option key and then click on the WiFi icon to see the disconnect option.

So here is a rundown of all the commands I ran in order to get the current MAC address, generate a random one, update the MAC address and then verify to make sure it had actually changed.

As I mentioned earlier, this is definitely not as straightforward as the process is on Windows, but you should be able to do it if you simply copy and paste the commands above. If you have any questions, feel free to post a comment. Enjoy!

The post Change or Spoof a MAC Address in Windows or OS X appeared first on Online Tech Tips.

Read More

How to Turn On Auto-Complete in the Command Prompt

How to Turn On Auto-Complete in the Command Prompt

Do you use the command prompt on a daily basis? If so, I recently found a way to turn on auto-complete for the command prompt via a simple registry edit. When typing in long path names, simply type in the first few letters and then press TAB to autocomplete either folder or file names.

For example, if I am typing in C:\Documents and Settings\, I would just need to type in C:\Doc and then press the TAB key.

As you can see, there is only one folder that starts with “doc“, so it automatically gets completed with quotes added. Now that’s pretty neat. If you want to continue further, just add another \ to the end and then press TAB. Note that you can add the forward slash after the quote and it will still work just fine.

You can continue through the different folders and files in a directory by simply pressing the TAB key. So if you type in C:\ and then keep pressing the tab key, you will be able to cycle through all the folders and files in that path in alphabetical order, i.e. C:\Documents and Settings, C:\Program Files\, etc.

Note that this really only applies to Windows XP. In Windows 7 and higher, autocomplete will work automatically when you press the TAB key.

Enable Autocomplete for Command Prompt

Step 1: Click on Start, then Run and type in regedit in Windows XP. In Windows 7 and higher, just clicking on Start and then type regedit.

Step 2: Navigate to one of the following registry keys:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor

HKEY_CURRENT_USER\SOFTWARE\Microsoft\Command Processor

So which one do you pick? Well, here’s how it works. The Local Machine key will apply to all users on the computer, but will be overridden by the Current User key if the value is different. For example, if autocomplete is disabled at the HKLM key, but enabled on the HKCU key, then it will be enabled. You can tell if autocomplete is disabled when pressing the TAB key simply inserts a TAB space.

You can change the settings in both locations if you like, but it is really only needed in the HKCU key for autocomplete to be enabled.

Step 3: Double-click on the CompletionChar key and change the value to 9 in decimal format. CompletionChar enables folder name completion.

You can also enable file name completion by changing the value of PathCompletionChar to 9 also. Note that the value 9 or 0x9 in hexadecimal is to use the TAB control character for autocomplete. You can also use other keys if you like.

For example, you can use 0x4 for CTRL + D and 0x6 for CTRL + F. I personally find the TAB key to be the most intuitive key, but you have other options if you need.

You can also use the same control character for both file and folder completion if you like. In this case, autocomplete will show you all matching files and folders for the given path.

As mentioned earlier, the default value in Windows 7, Windows 8 and higher is 0x40 (64 in decimal) in the HKLM key. It should be set to 0x9 (9 in decimal) in the HKCU key by default, which means it will be enabled. If not, you can manually go and change it.

Overall, this is a great time saver for anyone who has to type a lot of DOS commands. If you have any questions, feel free to post a comment. Enjoy!

The post How to Turn On Auto-Complete in the Command Prompt appeared first on Online Tech Tips.

Read More

How to Uninstall and Reinstall Windows Updates

How to Uninstall and Reinstall Windows Updates

Even though installing updates in Windows is an easy process, the mechanism in the background that manages it all is fairly complicated. There is also a lot of misinformation on the Internet about how to deal with problems relating to Windows Update.

One of the biggest misconceptions is that all Windows updates can be installed at once by simply deleting the SoftwareDistribution folder stored in C:\Windows. This is completely wrong. Yes, you might save some space (anywhere from 500 MB to several GB’s), but deleting the folder will not remove any installed update.

In addition it’s a bad idea to delete the SoftwareDistribution folder unless it is absolutely required. There is a subfolder called DataStore that has a large database of all the Windows Updates available. This database will probably be a couple of hundred MBs in size. Deleting this database simply removes the Windows Update history for the computer.

To prove this to myself, I did a test. I opened Control Panel, clicked on Windows Update and then clicked on View Update History in the left hand menu.

This screen just gives you a full list of installed updates with the Status, Importance and Date Installed. When we delete the SoftwareDistribution folder, this dialog will be completely empty as if you have never installed any updates. Before I show you that, click on the Installed Updates link at the top where it tells you how to remove an update.

As you can see, I have a couple of hundreds updates currently installed for Office, Windows, Silverlight, etc. Now if you follow the instructions below for deleting the folder, you can go back to View Update History dialog and you will see it’s now empty.

However, if you click on Installed Updates again, you will see that all the updates that were listed before and still listed there. This is because we simply deleted the log history of the updates and not the actual updates.

This dialog is where you can actually uninstall an update, but only one at a time. Simply click on an update and then click Uninstall. Unfortunately, there is no way to remove all updates at once unless you use System Restore.

If you use System Restore and restore the computer to a previous restore point, any updates that were installed after that restore point will be gone. To remove all updates, though, you would need a restore point created right after the OS was installed. Even if a restore point was created at that point, older ones normally get deleted over time to make space for newer restore points.

Still, if you have a lot of space allocated to System Restore, you might be able to roll back a couple months worth of updates at once.

Once you delete the contents of the folder, you will need to revisit Windows Update via Control Panel and check for updates. The entire database will be built from scratch and you may notice that Windows shows Checking for updates for a very long time. This is because a list of every update applicable to the OS has to be downloaded again and then compared to the updates currently installed on the system.

Delete SoftwareDistribution Folder

In order to remove this folder, you first have to stop the Windows Update and BITS services in Windows. To do this, click on Start and type in services.msc into the search box.

Next, right-click on the Windows Update service and click on Stop. Do the same thing for the Background Intelligent Transfer Service (BITS) service too.

Now navigate to the following folder shown below and you will see several folders listed there. The main ones that we will talk about are Downloads and DataStore.

C:\Windows\SoftwareDistribution

If you are trying to regain hard drive space only, then you should only delete the contents of the Download folder, though in theory this should not really be necessary. The Download folder actually holds all the updates that have been downloaded, but not yet installed. Once they are installed, the updates are removed within 10 days. So theoretically, that folder should shrink in size soon after you have installed all the Windows updates.

The DataStore folder contains the database with the full Windows update history for the computer. Once it is deleted, the update history dialog will be blank like I had shown above, but all your updates will still remain. You should really never delete the DataStore folder unless you are told to do so or if Windows Update is completely corrupt and misconfigured.

Note that you may not be able to delete certain folders and the ReportingEvents file. In the case where you can’t delete a folder, just open the folder and delete all the contents inside. For me, I got an error when trying to delete the DataStore folder, so I just went inside the folder and deleted the database file and all the other files in the folder.

Check for Windows Updates

If you did remove the SoftwareDistribution folder, you will want to go to Windows Update again to check for updates. It will show that you have never perform a check for updates since the update history is now gone.

Click the Check for updates button and be prepared to wait a while as the database is being recreated.

Conclusion

So the main point here is that you cannot really get rid of all Windows Updates at once unless you have a really old restore point saved on the system. Secondly, you should only delete the Downloads folder in the SoftwareDistribution folder if you are looking to save space or simply install all the latest updates and wait 10 days to see if they are removed automatically.

Thirdly, you should only delete the DataStore folder if something is really wrong with Windows Update like not showing any new updates for several months, etc. Hopefully, this gives you a better understanding of how Windows Update works and how the files are stored. If you have any questions, post a comment. Enjoy!

The post How to Uninstall and Reinstall Windows Updates appeared first on Online Tech Tips.

Read More